Tomatoville® Gardening Forums - View Single Post

Worth1 · March 25, 2016

Here is the making of the left side bracket.
No forcing or anything they fit like a glove.
To get the bend to come out right I measure make a mark and take off a wee bit maybe 1/8th this way the bottom of the bend is what I measured.
The boys in the paint department had to work over time to get this done so they are having a beer break on the house and I am about to join them.
By the way this bracket is mounted to the same spot the factory mufflers were mounted.

Worth
IMG_20160325_31112.jpg

IMG_20160325_49520.jpg

IMG_20160325_8309.jpg

IMG_20160325_2419.jpg

March 25, 2016	#1834
Worth1 Tomatovillian™ Join Date: Feb 2006 Location: Den of Drunken Fools Posts: 38,539	Here is the making of the left side bracket. No forcing or anything they fit like a glove. To get the bend to come out right I measure make a mark and take off a wee bit maybe 1/8th this way the bottom of the bend is what I measured. The boys in the paint department had to work over time to get this done so they are having a beer break on the house and I am about to join them. By the way this bracket is mounted to the same spot the factory mufflers were mounted. Worth IMG_20160325_31112.jpg IMG_20160325_49520.jpg IMG_20160325_8309.jpg IMG_20160325_2419.jpg Last edited by Worth1; March 26, 2016 at 01:26 AM.