View Single Post
Old March 22, 2012   #22
Tormato
Tomatovillian™
 
Join Date: Feb 2006
Location: MA
Posts: 3,874
Default

I start with a roughly 12" x 12" square of aluminum foil. Then make a cut from the midpoint of one side to the center of the square. Open the cut wide enough for the squash stem. Move the square so the stem is in the center of the square. Overlap the aluminum foil so there is no cut showing. I usually go 2" or more up the stem from ground level.

Tormato

Last edited by Tormato; March 27, 2012 at 02:15 PM.
Tormato is offline   Reply With Quote