If the threads are stripped i would replace it instead of reparing it. It will save you trouble in the long run. If it is a soldered fitting hopefully they did it right and used a male iron pipe thread fitting. If they did not i would invest a couple bucks and have someone solder on the male iron pipe fitting so you can change the hose bib easier in the future. I would personally steer clear of pvc on a copper line. It is accident waiting to happen if you ever hit it or it freezes. It is easier to use however.
__________________
“Enter by the narrow gate; for wide is the gate and broad is the way that leads to destruction, and there are many who go in by it. Because narrow is the gate and difficult is the way which leads to life, and there are few who find it."
|