Quote:
Originally Posted by Fusion_power
the problem was the platform which is 1.25 degrees tilted with respect to the drill bit. That does not sound like much, but over the 3 inches the drill bit travels it adds up to 1/8 of an inch.
|
I quite agree an error of 1.25 degrees can't be neglected when you drill thick pieces. If the platform of the drill is correct you could ask for a better upper part, the warranty could work. I understand it's quite annoying to discover such shortcomings on a new tool.
By now your bees must have a nice provision of food to spend the coming winter in good conditions
all the best