View Single Post
Old August 17, 2016   #22
Worth1
Tomatovillian™
 
Worth1's Avatar
 
Join Date: Feb 2006
Location: Den of Drunken Fools
Posts: 38,539
Default

I know how to wire up the motor I just need to trace out the wires and look at some diagrams.
There is no terminal block inside the pecker head, that is what they are called here in the states.
Everything is direct wired.
The thing had a 4 way switch mounted on the back and the on off switch was missing.
Many other parts are missing as well.
The thing had a saw table and all sorts of attachments that I dont even care to find.
It can be used as a drill press and I dont need that either.
As for the dust this thing will be mounted on a rolling stand and rolled outside.
When not in use it will be turned in the upright position and the rest of the stand will be used as a work bench.
I have no idea what was on the cast parts it must have been spry on primer.
I took the parts and either soaked them in hot water all night with laundry soap or boiled them in citric acid and laundry soap.
The grease dirt and what ever the rusty red stuff was came right off.
Worth
20160817_130443.jpg

20160817_130616.jpg

20160817_133218.jpg
Worth1 is offline   Reply With Quote