Tomatoville® Gardening Forums - View Single Post - Do i have enough pressure for BIY drip line or tape system?

MrSalvage · May 24, 2016

My water line is 202 ft down and 63 ft up Worth1. So then based on what you said I would have 141 ft of head. So does that give me an extra 60 PSI?

(The water line is only under that "left red line" I made on that picture. There is nothing under the "right" side line Worth. Only a measurement sir.)

As far as elevation the grade or angle of both hills are about the same. But as you can see in the picture the up hill is rather short @ 63 ft. This is where the water goes into the M/H

---

Now this is where it gets confusing to me. Do I need to figure out GPM at the well or at the house? I do not have a hose bib up at the well. I do have one right at the back of the mobile home.

Thank you Arlie, Salt & Worth...

May 24, 2016	#12
MrSalvage Tomatovillian™ Join Date: Apr 2016 Location: VA - Zone 7A Posts: 344	My water line is 202 ft down and 63 ft up Worth1. So then based on what you said I would have 141 ft of head. So does that give me an extra 60 PSI? (The water line is only under that "left red line" I made on that picture. There is nothing under the "right" side line Worth. Only a measurement sir.) As far as elevation the grade or angle of both hills are about the same. But as you can see in the picture the up hill is rather short @ 63 ft. This is where the water goes into the M/H --- Now this is where it gets confusing to me. Do I need to figure out GPM at the well or at the house? I do not have a hose bib up at the well. I do have one right at the back of the mobile home. Thank you Arlie, Salt & Worth...