I don't want to hijack Worth's thread, but here is the summary on the table saw.
It is missing the belt, miter, rip fence, rails that attach to the table for the fence to clamp, on/off switch, blade protector, and 2 pieces required to assemble the legs.
It has a good 3 HP motor, and that is 3 running HP, not just startup. The trunions are in good shape but the threaded rods that adjust blade angle and height need to be cleaned of surface rust and lubricated. Both extensions are in good condition though they need to have the rust cleaned off of the top surface.
I have a 1 HP Craftsman table saw that is essentially identical so I know what needs to be replaced. A friend here in town has the rails and rip fence that I can purchase for a few dollars. He put an expensive fence and rails on his saw a few years ago and removed the OEM parts to do so.
Oh, and I got it for $60 after complaining a bit about everything that is missing. I'd have paid $60 for the motor!
|