Tomatoville® Gardening Forums - View Single Post

Durgan · July 15, 2015

http://www.durgan.org/2015/July%2020...%20clamp/HTML/ 15 July 2015 Victorio Modified Mounting clamp
The mounting clamp on the Victorio Juicer is not adequate for mounting on a modern kitchen rounded counter top. It slips in use, so I decided to modify.
A strong clamp was purchased off the internet http://www.ebay.ca/itm/121136455726 and modified. The original clamp on the juicer was cut off and two 1/4 inch holes drilled for mounting. On the purchased mounting bracket two corresponding holes were tapped for taking 1/4 inch threaded bolt. This can be done with a hand drill, but is decidedly easier if taken to a machine shop. Fortunately I had the necessary bit and a tap.The modified mounting system is rock solid.

July 15, 2015	#71
Durgan Tomatovillian™ Join Date: Feb 2013 Location: Brantford, ON, Canada Posts: 1,341	Victorio Juicer Modified Mounting clamp http://www.durgan.org/2015/July%2020...%20clamp/HTML/ 15 July 2015 Victorio Modified Mounting clamp The mounting clamp on the Victorio Juicer is not adequate for mounting on a modern kitchen rounded counter top. It slips in use, so I decided to modify. A strong clamp was purchased off the internet http://www.ebay.ca/itm/121136455726 and modified. The original clamp on the juicer was cut off and two 1/4 inch holes drilled for mounting. On the purchased mounting bracket two corresponding holes were tapped for taking 1/4 inch threaded bolt. This can be done with a hand drill, but is decidedly easier if taken to a machine shop. Fortunately I had the necessary bit and a tap.The modified mounting system is rock solid. Last edited by Durgan; July 15, 2015 at 07:04 PM.