Made an aluminum T Nut with a 3/4 router bit the drill press and the XY Table.
I touched off on the side used the dials on the table moved in .335 and it came in dead on.
With the depth adjustment nuts I made some time ago I can get depth of cut pretty accurate.
I'm only taking off about .020 at a time down no side load to speak of.
Now all I need to do is dril and thread it.
My drill press vice sucks big time.
IMG_20190425_27321.jpg
IMG_20190425_38284.jpg
IMG_20190425_49464.jpg