Discussion forum for environmentally-friendly alternatives to replace synthetic chemicals and fertilizers.
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Tomatovillian™
Join Date: Dec 2016
Location: steamy southern Arkansas
Posts: 155
|
![]()
I have some liquid fish from Peaceful Valley (2-3-0.5) that I wanted to use to lightly feed my seedlings.
When I looked at the bottle, I was surprised to see that it recommended 6-8 Tbs per gallon. I thought that 1 tbs per gallon was a typical dilution? Why does my bottle recommend such a steep ratio? Which dilution would you recommend? Wasn't sure how to dilute for the seedlings (the math got odd as I only needed 2 cups). What I did was bottom water as usual but I didn't leave the plants in for their full soaking period, so they weren't totally moistened. I then added a squirt of diluted fish (a splash of emulsion in 2 cups of water) around the base of each little plant. Hope I didn't really mess things up? |
![]() |
![]() |
![]() |
#2 |
Tomatovillian™
Join Date: Oct 2014
Location: virginia
Posts: 743
|
![]()
The first time you put fish emulsion on plants they should have at least 1 set of true leaves.The solution should be very weak.I just put some on mine the other day and I mix it in a bucket and put enough fish emulsion to just barely make the water look dirty.The water is still clear and you can see the bottom of the bucket, but looks a little dirty.
And from my experience with it it seems to build up in the soil every time you use it even if you use the same amount every time.You will know if you put to much as the plants will wilt in the sun.The good thing with fish emulsion is you can flush them with fresh water and put in the shade and the next day they are fine.Mix it weak and be on the safe side. Sorry I can't be more specific, but don't measure anything. ![]() |
![]() |
![]() |
![]() |
#3 |
Tomatovillian™
Join Date: Jul 2007
Location: Midway B.C. Canada
Posts: 311
|
![]()
If you are going to spray it on 50 to 1 or more and not in the heat of the day. 5 gallons before dilution per acre is the rate we have used.
1 to 160 is the dilution we are using on garlic with no problems.
__________________
Henry Last edited by henry; March 30, 2017 at 12:05 PM. Reason: adding to. |
![]() |
![]() |
![]() |
#4 | |
Tomatovillian™
Join Date: Mar 2016
Location: Mechanicsville, VA zone 7a
Posts: 97
|
![]() Quote:
__________________
"The task of the modern educator is not to cut down jungles but to irrigate deserts." C.S. Lewis |
|
![]() |
![]() |
![]() |
#5 | |
Tomatovillian™
Join Date: Dec 2010
Location: Pewaukee, Wisconsin
Posts: 3,148
|
![]() Quote:
I would try adding 1/4 of a teaspoon to your 2 cups and then check to see how your plants respond in 3-5 days. Adjust the mix as necessary.
__________________
~ Patti ~ |
|
![]() |
![]() |
![]() |
#6 |
Tomatovillian™
Join Date: Mar 2014
Location: Greenville, South Carolina
Posts: 3,099
|
![]()
Ive used fish emulsion for several years. 6-8 tsp is for a full sized tomato plant. For seedlings I use about a half tsp to start and up it 1/2 tsp for each new leaf set. I wouldn't recommend using fish emulsion as a foliar, every time I tried to it would cause discoloration and/or damage to the leaves. At fruitset I apply 8 tbs per week.
|
![]() |
![]() |
![]() |
|
|