Tomatoville® Gardening Forums


Notices

Have a great invention to help with gardening? Are you the self-reliant type that prefers Building It Yourself vs. buying it? Share and discuss your ideas and projects with other members.

Reply
 
Thread Tools Display Modes
Old September 3, 2016   #16
Worth1
Tomatovillian™
 
Worth1's Avatar
 
Join Date: Feb 2006
Location: Den of Drunken Fools
Posts: 38,539
Default

All gears in a set have to have the same diametral pitch to match up.
The center idler gear moves around to accommodate different gear sizes and to set your tooth clearance.

Someone did the research for me as there were too many combinations that weren't on the chart.
I cant eve begin to count all of the TPI this contraption will cut.
But still no 2 treads per inch the smallest is 3.2 threads per inch.
I new how to set the gears up for this I had no idea what the treads per inch would be.
https://www.google.com/url?sa=t&rct=...AoySUCKVJabZIw

Last edited by Worth1; September 3, 2016 at 04:43 PM.
Worth1 is offline   Reply With Quote
Old September 3, 2016   #17
Worth1
Tomatovillian™
 
Worth1's Avatar
 
Join Date: Feb 2006
Location: Den of Drunken Fools
Posts: 38,539
Default

I dont want to cut two threads per inch to make threads I want that pitch to make a spiral profile on something.
Doing this by putting spinning cutters on the tool post by way of a flex shaft.

Worth
Worth1 is offline   Reply With Quote
Old September 3, 2016   #18
Fusion_power
Tomatovillian™
 
Fusion_power's Avatar
 
Join Date: Feb 2006
Location: Alabama
Posts: 2,250
Default

Worth, your jangling about 2 tpi reminds me of an old and very expensive wood turning lathe that was designed to cut patterns lengthwise on a piece of wood. Instead of spindles, it made spirals. That machine was a work of art.
Fusion_power is offline   Reply With Quote
Old September 3, 2016   #19
Worth1
Tomatovillian™
 
Worth1's Avatar
 
Join Date: Feb 2006
Location: Den of Drunken Fools
Posts: 38,539
Default

Quote:
Originally Posted by Fusion_power View Post
Worth, your jangling about 2 tpi reminds me of an old and very expensive wood turning lathe that was designed to cut patterns lengthwise on a piece of wood. Instead of spindles, it made spirals. That machine was a work of art.

Sears made that crazy router crafter that could do all kinds of stuff.

Worth
Worth1 is offline   Reply With Quote
Old September 3, 2016   #20
Worth1
Tomatovillian™
 
Worth1's Avatar
 
Join Date: Feb 2006
Location: Den of Drunken Fools
Posts: 38,539
Default

I'm so darned aggravated right now I had to walk away.
I tried to fix a mistake the easy way and made it worse.
IF I sit back everything will be okay if not it will end up in the next project scrap pile.

I need a milling machine in the worst way.
The darn tooling for one is higher than a cats back.
Plainly admitted I got in a hurry

Worth

Last edited by Worth1; September 3, 2016 at 11:08 PM.
Worth1 is offline   Reply With Quote
Old September 3, 2016   #21
Worth1
Tomatovillian™
 
Worth1's Avatar
 
Join Date: Feb 2006
Location: Den of Drunken Fools
Posts: 38,539
Default

I wonder what the neighbors thought of the noise and creative profanity coming out of the garage.
Made Full Metal Jacket look tame.

Worth
Worth1 is offline   Reply With Quote
Old September 4, 2016   #22
dmforcier
Tomatovillian™
 
dmforcier's Avatar
 
Join Date: Apr 2016
Location: Dallas, TX
Posts: 3,825
Default

Well, I know where there's a milling machine, but I don't think you want to pay the freight from ATL.

Sleep on it. It will look different in the morning.




Maybe not better, but different.
__________________


Stupidity got us into this mess. Why can't it get us out?
- Will Rogers


dmforcier is offline   Reply With Quote
Old September 4, 2016   #23
Worth1
Tomatovillian™
 
Worth1's Avatar
 
Join Date: Feb 2006
Location: Den of Drunken Fools
Posts: 38,539
Default

The milling machine is no problem the tooling is.

I am being picky I wanted to weld this thing up with no fill in but now I have to about 1/16th worth.
Then I ground something at the wrong angle on the wrong side.
As I was using the hole saw the darn thing jumped out of the vise and got out of line.
What I should have done is took the big vise off the bench and mounted it on the drill press.
Every time I question what I am doing it is a catastrophe.
If I dont get the other side right it is trash.
I completely skipped a step during the whole set up process and didn't realize it till it was to late.
I have to put this same thing on the other side of the channel iron and it has to be perfect or it wont work.
The only way I can do this is to weld it sitting on the ways for correct alignment.

Here is the results of my mess up that darn gap on top.
Worth.
20160903_193742.jpg

20160904_000058.jpg

20160904_000104.jpg
Worth1 is offline   Reply With Quote
Old September 4, 2016   #24
dmforcier
Tomatovillian™
 
dmforcier's Avatar
 
Join Date: Apr 2016
Location: Dallas, TX
Posts: 3,825
Default

Yah. Hole saw is wood tooling. I feel your pain.
__________________


Stupidity got us into this mess. Why can't it get us out?
- Will Rogers


dmforcier is offline   Reply With Quote
Old September 4, 2016   #25
Worth1
Tomatovillian™
 
Worth1's Avatar
 
Join Date: Feb 2006
Location: Den of Drunken Fools
Posts: 38,539
Default

I used all of the hole saws for conduit chases in switch gear boxes they suck even though they are for metal.
Worth
Worth1 is offline   Reply With Quote
Old September 4, 2016   #26
dmforcier
Tomatovillian™
 
dmforcier's Avatar
 
Join Date: Apr 2016
Location: Dallas, TX
Posts: 3,825
Default

I've used them on sheet metal too. They suck, period. There's got to be a better way.
__________________


Stupidity got us into this mess. Why can't it get us out?
- Will Rogers


dmforcier is offline   Reply With Quote
Old September 4, 2016   #27
loulac
Tomatovillian™
 
loulac's Avatar
 
Join Date: Feb 2013
Location: France
Posts: 554
Default

Quote:
Originally Posted by dmforcier View Post

loulac, you invited me some time ago to comment on your vocabulary, so here goes. You used the word "effort" in a previous post talking about the stress on a bearing. A better word would have been "force". "Effort" applies an intentional application of force. If you want I can try to find the post.
Please don't waste you time looking for a former post, I quite believe you though Texans are said to have a tendency to exaggerate a bit from time to time...

Your comments on my English are always greatly appreciated, though I must say I'm now a bit overloaded with years to make full use of them
loulac is offline   Reply With Quote
Old September 4, 2016   #28
Worth1
Tomatovillian™
 
Worth1's Avatar
 
Join Date: Feb 2006
Location: Den of Drunken Fools
Posts: 38,539
Default

Quote:
Originally Posted by loulac View Post
Please don't waste you time looking for a former post, I quite believe you though Texans are said to have a tendency to exaggerate a bit from time to time...

Your comments on my English are always greatly appreciated, though I must say I'm now a bit overloaded with years to make full use of them
I think you are doing just fine I understand everything you say dont worry about it.
If you dont understand it is my fault for not using the right words.
I always look forward to your comments and look up to you and admire your wisdom.


Worth
Worth1 is offline   Reply With Quote
Old September 4, 2016   #29
loulac
Tomatovillian™
 
loulac's Avatar
 
Join Date: Feb 2013
Location: France
Posts: 554
Default

Quote:
Originally Posted by dmforcier View Post
I've used them on sheet metal too. They suck, period. There's got to be a better way.
I remember meeting that problem in the past.

I punched the center of the part and set it on the faceplate of my lathe, checking it was not off-center. Tricky with the four sliding fixations.
I drilled a hole big enough to give room to a cutting tool and brought the hole to the right dimension.

Of course there must be other ways to do it. Once I used acetylen first, then the lathe.
loulac is offline   Reply With Quote
Old September 4, 2016   #30
loulac
Tomatovillian™
 
loulac's Avatar
 
Join Date: Feb 2013
Location: France
Posts: 554
Default

Quote:
Originally Posted by Worth1 View Post
I always look forward to your comments and look up to you and admire your wisdom.Worth
Don't you think you are a bit overdoing it ? This must be your Texan touch. The point is I have been young much longer than you have.

I read your post at 10 o'clock French time, you wrote it at 3 a.m. Texan Time. Do you ever sleep ?
loulac is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:14 AM.


★ Tomatoville® is a registered trademark of Commerce Holdings, LLC ★ All Content ©2022 Commerce Holdings, LLC ★