Tomatoville® Gardening Forums


Notices

Have a great invention to help with gardening? Are you the self-reliant type that prefers Building It Yourself vs. buying it? Share and discuss your ideas and projects with other members.

Reply
 
Thread Tools Display Modes
Old October 17, 2017   #271
Worth1
Tomatovillian™
 
Worth1's Avatar
 
Join Date: Feb 2006
Location: Den of Drunken Fools
Posts: 38,539
Default

I need to make a bigger steady rest and a better follow rest for the lathe.
Actually maybe two follow rests one smaller and one bigger.
My problem is getting slots cut.
I might have to send them off to or take to a guy up north I know.
The man is an expert and a real class act.

Worth
Worth1 is offline   Reply With Quote
Old October 22, 2017   #272
Worth1
Tomatovillian™
 
Worth1's Avatar
 
Join Date: Feb 2006
Location: Den of Drunken Fools
Posts: 38,539
Default

For some time I have been using all sorts of stuff for a lathe carriage stop from boards to lord knows what.
Well today I was out fooling around and it hit me like a bolt of lightning.
It doesn't have to be mounted on the ways of the bed it just has to be someplace the carriage can bump it.

Carriage stop coming soon.

Worth
Worth1 is offline   Reply With Quote
Old October 22, 2017   #273
Worth1
Tomatovillian™
 
Worth1's Avatar
 
Join Date: Feb 2006
Location: Den of Drunken Fools
Posts: 38,539
Default

Not quite for sure exactly how it will be done in detail but here are the ingredients for the lathe stop.
Three 3/4 10 threads per inch bolts.
One all thread coupling.
One metric 6MM X 50MM Allen head screw to take the place of the shorter one next to it.
Not in picture is four feet of 1/2 inch cold roll round bar stock.
All those bolts and rod coupling cost me two dollars I had in my pocket from selling a used lighter at work.
Don't ask me how I pulled it off the guys where I get this stuff are way cool and why I shop there.
They see me all the time.
This stuff will not look like bolts when I am though, but why bother cutting those threads on stock when you can get what you need for cheap.
Worth

IMG_20171022_6251.jpg

Last edited by Worth1; October 22, 2017 at 01:12 PM.
Worth1 is offline   Reply With Quote
Old October 22, 2017   #274
Worth1
Tomatovillian™
 
Worth1's Avatar
 
Join Date: Feb 2006
Location: Den of Drunken Fools
Posts: 38,539
Default

Decided to stop for the day.
Here it is so far more or less a proof of concept.
The thing as it is now will work but I am going to make a fine adjustment contraption with the 1/2 stock and 20 threads per inch.
Decided to leave the bolt heads alone makes for easy removal.
One full rotation of the bolt is 1/10th of an inch or .100.
Worth

IMG_20171022_45263.jpg

IMG_20171022_377.jpg

IMG_20171022_20334.jpg

IMG_20171022_34916.jpg

IMG_20171022_51360.jpg

IMG_20171022_10293.jpg

IMG_20171022_21449.jpg
Worth1 is offline   Reply With Quote
Old October 22, 2017   #275
Worth1
Tomatovillian™
 
Worth1's Avatar
 
Join Date: Feb 2006
Location: Den of Drunken Fools
Posts: 38,539
Default

Warning!!!
You do NOT run the carriage up to the stop under power feed or threading it will kill the lathe.
It is for running the carriage up to a preset stop setting by hand.
This allows you to keep coming back to the same place every time without a bunch of fiddling around.
Many uses for it too many to point out.
I had a need, then an idea with a problem to solve then the problem was solved and the contraption was made.
Very happy with this and how it came out so far, a real blessing to have this simple device.

Worth
Worth1 is offline   Reply With Quote
Old October 29, 2017   #276
Worth1
Tomatovillian™
 
Worth1's Avatar
 
Join Date: Feb 2006
Location: Den of Drunken Fools
Posts: 38,539
Default

Looks a little less hardware store like now.
Cut unnecessary hex off nuts and turned and faced off the bolts.
I have a short bolt and a long one that will suffice for most operations.
Worth
IMG_20171029_3430.jpg

IMG_20171029_49694.jpg
Worth1 is offline   Reply With Quote
Old October 29, 2017   #277
Worth1
Tomatovillian™
 
Worth1's Avatar
 
Join Date: Feb 2006
Location: Den of Drunken Fools
Posts: 38,539
Default

Here is a picture of a device someone made but I have made it simple to look at I think.
This is someones idea of a zero backlash device they made on a video I saw.
When I saw it I knew right off the bat it wouldn't work.
But he thinks it will or does and so did everyone else that commented but me.
What he now has is spring loaded backlash.
everyone one thought what a wonderful idea and why didn't they do this all along.
It is simple it doesn't and cant work.

To remove backlash but not all, you have to force a split nut together or apart on a cross feed adjustment lead screw.
You have to have some they cant be tight or they will just cause wear and you need lubricant to pass through the threads.
There are many ways to make this happen but it has to be positive and lockable in some way.
Not a spring or springs.
The green and the blue represent threads one on the lead screw the other color on the two nuts.
FailR.jpg
Worth1 is offline   Reply With Quote
Old December 2, 2017   #278
Worth1
Tomatovillian™
 
Worth1's Avatar
 
Join Date: Feb 2006
Location: Den of Drunken Fools
Posts: 38,539
Default Files

Yesterday I was put to task to make something work.
I wish I would have taken pictures.
Had two other young guys with me.
I had to use files to hand machine something to make it work.
I did one side and asked my coworker to do the other side.
The custom made/machined piece cost a lot of money and there was only one.
Well I had to take it away from him before he made a total mess of it.

How do you do that you make it look so easy?
My reply was a lifetime of using files.
My lesson was this morning I realized it is like playing a guitar you cant just pick one up and play it.
Nor can you do it with a file.
Something I thought all of my life any idiot could do is in reality a very hard thing to do and takes lots of practice.
People that dont know how to use a file think of them as a crude instrument.
People that do know they are a precision tool.
Worth
Worth1 is offline   Reply With Quote
Old December 2, 2017   #279
dmforcier
Tomatovillian™
 
dmforcier's Avatar
 
Join Date: Apr 2016
Location: Dallas, TX
Posts: 3,825
Default

If I were cast back in time with no tools but one, the one I would take would be a good file.

Mostly, it seem to be that using a file is much as Michelangelo said of sculpture: There is a beautiful statue inside this block of marble. The sculptor's task is to reveal it.
__________________


Stupidity got us into this mess. Why can't it get us out?
- Will Rogers


dmforcier is offline   Reply With Quote
Old December 3, 2017   #280
loulac
Tomatovillian™
 
loulac's Avatar
 
Join Date: Feb 2013
Location: France
Posts: 554
Default

In old days it took months to teach apprentices in technical schools to use a file correctly. Even now good filers are needed in aviation industry when rivet heads must become invisible yet keep their strenght.
loulac is offline   Reply With Quote
Old December 3, 2017   #281
Worth1
Tomatovillian™
 
Worth1's Avatar
 
Join Date: Feb 2006
Location: Den of Drunken Fools
Posts: 38,539
Default

Years ago I coworker brought a nice JA Henckel knife to work for me to do something with.
It was in the shop I worked in and I used the white grind stone to do it.
The same one we used to grind profile knives for the shaper.
My boss came by and said you are putting a 100 dollar knife on the grinder, in shock.
I hadn't started yet and showed him the knife.
He was flabbergasted it looked like someone had used it to cut stone.
Round on the cutting edge with nicks.
His reply was, "Well I guess you dont have much of a choice".
The coworker had received the knife set as a wedding gift and had no idea how expensive these knives were.
Of course the blade spent more time in the water cooling than it did on the grinder.
Then I finished with a smooth cut file and then India stones.
Worth1 is offline   Reply With Quote
Old December 18, 2017   #282
Fusion_power
Tomatovillian™
 
Fusion_power's Avatar
 
Join Date: Feb 2006
Location: Alabama
Posts: 2,250
Default

I've got some really good Mac knives that I bought on Ebay. Several of them were chipped and most needed serious work on the cutting edge. I started with a grinder to remove the damaged areas, then used a fine stone to cut a smooth surface, and followed up with a set of diamond sharpeners to set the new edge. It was worth the effort!

Why do so few teach their kids how to sharpen tools properly? I've seen absolute messes made of axes, screwdrivers, planer blades, chisels, and wood lathe tools.
Fusion_power is offline   Reply With Quote
Old December 19, 2017   #283
Worth1
Tomatovillian™
 
Worth1's Avatar
 
Join Date: Feb 2006
Location: Den of Drunken Fools
Posts: 38,539
Default

Quote:
Originally Posted by Fusion_power View Post
I've got some really good Mac knives that I bought on Ebay. Several of them were chipped and most needed serious work on the cutting edge. I started with a grinder to remove the damaged areas, then used a fine stone to cut a smooth surface, and followed up with a set of diamond sharpeners to set the new edge. It was worth the effort!

Why do so few teach their kids how to sharpen tools properly? I've seen absolute messes made of axes, screwdrivers, planer blades, chisels, and wood lathe tools.
Several reasons.
You are my age, or is it I am your age.
1 We are pretty much that last of a generation of any amount that even knows how.
2 The more people that moves to cities and away from farms the less use the general population has for doing these things.
3 Lazy and no interest, it is dull, get a machine to do it or buy a new one.
4 People far older than us dont know how because they were raised in the cities.
5 They dont know how to so they can teach their kids.
6 Their kids cant carry a knife to school like we did, I find very few people in their 30's that can understand why I carry a knife much less two knives.
7 By not being allowed to carry a knife they start assuming it is only for bad things like hurting people.
8 I take that back they are taught it is only for hurting people.
9 You might hurt yourself, better to get a professional to sharpen it.
10 In the old days everybody had a knife or a hatchet including women and children not so anymore.
They also knew how to start a fire without matches because they didn't have any.
When I was 10 years old I carried a 12 inch bladed hand made knife at home in the woods on my belt it was as long as my leg and as sharp as a razor.
I carried my trusty 28 gauge shotgun I still have to this day.
Times have changed I haven't.

Worth
Worth1 is offline   Reply With Quote
Old February 11, 2018   #284
Worth1
Tomatovillian™
 
Worth1's Avatar
 
Join Date: Feb 2006
Location: Den of Drunken Fools
Posts: 38,539
Default

A thousand and one uses for the lathe, here is yet another one.
Off with the old and on with the new.
Worth
IMG_20180211_24847.jpg

IMG_20180211_34254.jpg
Worth1 is offline   Reply With Quote
Old February 12, 2018   #285
matereater
Tomatovillian™
 
matereater's Avatar
 
Join Date: Jul 2006
Location: S.E. Michigan (Livonia)
Posts: 1,264
Default

I dont fish much but heard theres a certain way you need to put line on a fishing reel or it tangles when you cast.

Is that true ??
__________________
Steve

Cleverly disguised as a responsible adult
matereater is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 05:34 PM.


★ Tomatoville® is a registered trademark of Commerce Holdings, LLC ★ All Content ©2022 Commerce Holdings, LLC ★