Tomatoville® Gardening Forums


Notices

Discussion forum for the various methods and structures used for getting an early start on your growing season, extending it for several weeks or even year 'round.

Reply
 
Thread Tools Display Modes
Old June 25, 2017   #1
49tandc
Tomatovillian™
 
Join Date: Apr 2016
Location: North Florida
Posts: 24
Default How can I reduce heat inside greenhouse.

I do not have electricity (except 12V. solar) in the greenhouse. Standard temps from late May thru Sept is mid 90s here in North Florida. Greenhouse goes over 100 most of the afternoon)

I'm considering running misters on a timer (a 12V solution); Getting a couple of 12V fans from the junkyard (another 12 V that would require another battery/solar panel, etc). or getting a couple of "wind turbines and cutting holes in the plastic to let the heat out.

Do any of you guys or girls have experiences with these methods, or perhaps have a better solution? I'm all ears...


48T&C
49tandc is offline   Reply With Quote
Old June 25, 2017   #2
Worth1
Tomatovillian™
 
Worth1's Avatar
 
Join Date: Feb 2006
Location: Den of Drunken Fools
Posts: 38,539
Default

Vent/open the bottom and vent/open the tops all the way down.
No I dont have a green house myself but it is the only way you will be able to dump the hot air out without power.

Worth.
Worth1 is offline   Reply With Quote
Old June 25, 2017   #3
Nematode
Tomatovillian™
 
Join Date: May 2012
Location: massachusetts
Posts: 1,710
Default

Spray the white stuff on the plastic to cut the heat load.
I think its a clay.
Open it as much as possible. Cut it if you have to in a way thats patchable.
Nematode is offline   Reply With Quote
Old June 25, 2017   #4
49tandc
Tomatovillian™
 
Join Date: Apr 2016
Location: North Florida
Posts: 24
Default

Both ends of the greenhouse are open, and the side plastic is rolled up for the summertime Just the top is covered in plastic, but its still VERY hot in there. My tomato production is way down. Flowering, but not producing little toms.

Thanks,
49T&C
49tandc is offline   Reply With Quote
Old June 25, 2017   #5
mjc
Tomatovillian™
 
mjc's Avatar
 
Join Date: Jun 2009
Location: WV
Posts: 603
Default

Shade cloth.

What style of house?

What's the spacing on supports? Could you possibly stretch a piece of plywood across somewhat close to the top to mount the turbine type exhaust fan?

Increasing the humidity with the misters will probably make things worse...clumping of what little pollen the heat hasn't fry and increase the chances of fungus problems.
mjc is offline   Reply With Quote
Old June 25, 2017   #6
Nematode
Tomatovillian™
 
Join Date: May 2012
Location: massachusetts
Posts: 1,710
Default

Ok only other thing I can find is this:
http://www.greenhousemegastore.com/p.../shade-cloth_1

Pricey though....
Nematode is offline   Reply With Quote
Old June 25, 2017   #7
mjc
Tomatovillian™
 
mjc's Avatar
 
Join Date: Jun 2009
Location: WV
Posts: 603
Default

I'd be very tempted to go with this...

https://www.lowes.com/pd/Phifer-18X1...n-Wire/3034437

It will cut down quite a bit of sun. No, it's not quite as sturdy, but it will work (there is 'denser' stuff, too...so check the various offerings).
mjc is offline   Reply With Quote
Old June 25, 2017   #8
49tandc
Tomatovillian™
 
Join Date: Apr 2016
Location: North Florida
Posts: 24
Default

The house is 12 wide X 40 long X 8 ft tall hoop house, with 16 ft cattle panels making the hoop. The shade cloth is laid over the panels and plastic over the shade cloth. I have a steel pipe running down the middle at the peak which supports the tomatoes (on string). It has withstood a couple of very strong topical storms already, but there is no other bracing in the house.

49T&C
49tandc is offline   Reply With Quote
Old June 25, 2017   #9
Cole_Robbie
Tomatovillian™
 
Cole_Robbie's Avatar
 
Join Date: Jun 2012
Location: Illinois, zone 6
Posts: 8,407
Default

I used to throw mud on mine, before I finally bought some shade cloth.
Cole_Robbie is offline   Reply With Quote
Old June 26, 2017   #10
bower
Tomatovillian™
 
bower's Avatar
 
Join Date: Feb 2012
Location: Newfoundland, Canada
Posts: 6,794
Default

Short of cutting holes in it, it sounds like fans must be the answer... you already have vented the sides and are using shade cloth, but the top is still trapping heat. The ends should be vented right to the top, and install your fan up there to blow fresh air through the top so heat isn't trapped.

Being in Florida, a solar powered fan would be the obvious solution to no electric on site.
bower is offline   Reply With Quote
Old June 26, 2017   #11
My Foot Smells
Tomatovillian™
 
My Foot Smells's Avatar
 
Join Date: Jun 2015
Location: Pulaski County, Arkansas
Posts: 1,239
Default

hmmmm..... if your outside temp is 90 and your gh only gets to a hundy, that's not too shabby. my gh is storage during may-October, as it can get 180 up in there on a 90 degree day - and that is with cross ventilation (door wide open & 2'x2' window open).

I have a fan and 120v, but pffffffftttt doesn't seem to help much. shade cloth does help - some - but probably need something from nasa if gets west sun. NoFlo can be brutal despite the "north" being in the name & sticky too.

a pic would be helpful, but have to ask why you are in the gh anyways, unless you plan on running some ac up in there.
My Foot Smells is offline   Reply With Quote
Old January 26, 2018   #12
Black Krim
Tomatovillian™
 
Join Date: Dec 2016
Location: New England
Posts: 661
Default

https://www.youtube.com/watch?v=QRgFp7thJMQ

At 4:37 is a mechanical vent. Need to be set into a frame though.
Black Krim is offline   Reply With Quote
Old January 26, 2018   #13
BigVanVader
Tomatovillian™
 
BigVanVader's Avatar
 
Join Date: Mar 2014
Location: Greenville, South Carolina
Posts: 3,099
Default

50% shade cloth is what all the growers here use.

https://www.amazon.com/EasyShade-Bla...oth+for+plants

I only needed it for 1 side so for 20 bucks I dropped my temps inside 20 degrees
Attached Images
File Type: jpg 20170602_164203 (1).jpg (389.8 KB, 111 views)

Last edited by BigVanVader; January 26, 2018 at 11:23 PM.
BigVanVader is offline   Reply With Quote
Old January 27, 2018   #14
Cole_Robbie
Tomatovillian™
 
Cole_Robbie's Avatar
 
Join Date: Jun 2012
Location: Illinois, zone 6
Posts: 8,407
Default

My stuff is the "aluminet," 45%. It looks like a silver foil mesh.
Cole_Robbie is offline   Reply With Quote
Old January 27, 2018   #15
clkeiper
Tomatovillian™
 
clkeiper's Avatar
 
Join Date: Nov 2011
Location: ohio
Posts: 4,350
Default

I use aluminet. too. it really does work better. we wiggle wire it right to the high tunnel. sell your tomatoes to pay for the stuff if it is too costly to pay for out of pocket. if you go more than 50% shade you will get NO tomatoes. they won't blossom. the screening from lowes... does it tell what the percentage is? if not I wouldn't take my chances on trying it.
__________________
carolyn k
clkeiper is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 08:38 AM.


★ Tomatoville® is a registered trademark of Commerce Holdings, LLC ★ All Content ©2022 Commerce Holdings, LLC ★